Samsung TV Red Light Blinking 6 Times (Fixed Solution)

While using a Samsung TV, some of the viewers have encountered a rather disturbing problem as the screen simply goes black and the red light blinks over and over again, this being six times. 

The flash may be annoying especially if you want to watch your favorite movie or catch a match. 

In this article, we will try to address this problem, explaining the basic reasons for this phenomenon. 

Detail the ways to troubleshoot it step by step, and provide simple examples to make the problem understandable. 

By the end, you will know exactly why your Samsung TV is operating like this, and here is how to solve the problem.

The Cause of the Red Light Blinking 6 Times

It is important to note before attempting any troubleshooting procedure regarding the power light blinking six times. 

This issue generally indicates a problem related to the TV’s power supply or associated circuits. Here are some plausible contributors:

Faulty Power Supply: 

The power supply unit (PSU) is a component that plays the role of converting alternating current (AC) voltage sources to direct current (DC) power that the TV requires for optimum performance. 

When this component fails, the red light can start blinking.

Short Circuit or Electrical Surge: 

Short circuits or surges in power levels can lead to damage to some components in the internal structure. 

If there were some sort of electrical disturbance to your television, then this would be the reason causing the problem.

Overheating: 

In case a Samsung television has been utilized in an area that is poorly ventilated.

Its temperature could reach high levels and have varying performance impacts such as the constant flashing of lights.

Firmware Issues: 

There are instances where none of the hardware faults can be found, but rather a malfunction, or bugs. 

Software of the operational systems that become unresponsive, or their firmware is overly outdated. 

The red light on the TV could be caused by a power cycle interruption during a firmware update and thus blinks.

Hardware Failure: 

Some components such as the mainboard, inverter, or display panel could eventually break down with time. 

The defect of any of these components brings about the blinking of the red light six times.

Troubleshooting Steps to Fix the Issue

Having identified the reasons, let’s move to practical addressing of the topic: this is troubleshooting. 

Use the following steps to fix the blinking red light problem with your Samsung television.

Step 1: Power Cycle the TV

What You’ll Need: Just the TV and the remote control for the TV.

Instructions:

Disconnect the TV from the wall socket.

Rest for thirty or more seconds. This is helpful as it allows the TV to reset itself.

While the power cord has been removed, locate the power button on the TV set and hold it for about 15 seconds. 

This is an effective way of discharging any remaining power that may still be in the circuit.

Reconnect the power cord and switch on the television set.

 

Personal Anecdote: 

I guess it was the first time for me to come across this problem, and as young as I was. 

I panicked! In my mind I was thinking of how to replace my television set as in my mind, it was dead. 

Later on, when I tried the power cycle method, I was able to turn the television on once again.

It is an effective time saver, many people have learned to turn their televisions off and on.

Step 2: Inspect the Power Supply

What You’ll Need: A multimeter (assuming you know how to use one) may also be useful.

Instructions:

Remove the power cord move the TV to a relatively calm, bright area, and examine it closely.

If the back panel can be removed, do so, and visually inspect the power supply for bulging capacitors and burn marks.

You may also use the multimeter to measure the voltage coming out of the power supply.

Should you observe any problems, you may wish to consider the possible replacement of the power supply unit.

Step 3: Check for Short Circuits

What You’ll Need: 

Basic tools to check wiring.

Instructions:

Check any external wires for tightness.

Next, check the power cable for any frays or damages.

In case any of the cables show damage, replace it with a new one.

Samsung TV Standby Light Flashing But Won’t Turn On [Fixed]

Step 4: Ensure Proper Ventilation

What You’ll Need: None.

Instructions:

Position the TV such that it has enough breathing space. Ideally, the TV should not be touching walls or any object for a few inches.

Look very carefully for dust on the vents and wipe the vent areas with a soft brush or a vacuum cleaner.

 

Personal Anecdote: 

After noticing overheating in my TV, I made sure to keep it in a well-ventilated area. 

I was surprised at how well it worked, there were no blinking lights!

Step 5: Update Firmware

What You’ll Need: 

An extra device with access to the internet and a USB stick.

Instructions:

Go to the official Samsung support page and type the model of your TV.

Make sure to load the USB flash drive with the new firmware.

Power off the television and plug in the USB with the firmware to one of the USB sockets.

Let the TV boot up, and when it is powered up, update the TV through the adb interface.

 

Step 6: Contact Customer Support

Lastly, if every effort has failed, you should contact the customer service provided by Samsung. 

They can offer alternate solutions or an authorized center.

Frequently Asked Questions (FAQs)

How do I know if my Samsung TV is still under warranty?

To verify the warranty status, visit the Samsung site and type the model number or the serial number of your TV into the search box. 

It may be possible to have repairs performed if your TV falls within the warranty period.

Can I fix the power supply myself?

If you know how to work with electronics and are confident enough, you can try to replace the power supply. 

Per chances, you are not confident, it is wise to seek the help of a specialist.

Is it safe to unplug my TV frequently?

Most of the time it is safe to disconnect the TV from the power source when needed.

But do not make it a normal way of operating since it will eventually cause wear down of the internal parts of the TV.

What should I do if the red light continues to blink after troubleshooting?

If you have gone through all the processes but the red light is still blinking, hardware malfunction is what is probably the cause of the problem. 

In this case, contacting Samsung support or a qualified repair center is the most reasonable action to take.

Will I lose my settings if I update the firmware?

The usual case is that complete settings are not lost after a firmware upgrade. Even so, it is wise to make a copy of any crucial settings just in case.

Conclusion

It may be disappointing to see your Samsung television with a blinking red light six times. 

However, knowing what the likely problems are and how they may be solved provides some relief even though it is not a complete solution. 

Various things can be done first such as power cycling the TV and inspecting the power supply as well as heating issues before attempting to call the professionals.

My own experiences as well as those narrated by others familiar to me tell me that this is a problem that Samsung TV owners have to contend with. 

As per the above instructions, you stand a chance to solve the problem on your own and return to watching the shows and movies you love. 

Remember if nothing else works, you can always contact Samsung customer support for help with this issue.

If handled properly, you can change an awful scenario into a bearable one. 

Your purpose of buying a Samsung TV was for fun and entertainment and provided that you put in some effort, it will remain so.

Samsung TV Screen Goes Black But Sound Still Works [Fixed]