Hisense TV Not Turning On [Causes & Solution]

aIt is all very exciting to settle down after a rough day at work and catch the next episode of your favorite series from your Hisense TV, only to realize that your Hisense TV will not turn on.

 

The power-off frustration physically sets in as you push the power button over and over, blankly staring at the screen which is still black.

 

You are not the only person who has been in such a condition; the majority of the users have faced such issues.

 

In this all-inclusive guide, we will discuss the reasons why the Hisense TV might be unresponsive and give effective problem-solving because you need to watch too much TV.

Hisense TV Settings 

Understanding The Problem

As it is now time for problem-solving, it should be explained, why your Hisense TV will not turn on.

 

The causes can range from minor issues, such as a faulty remote, to aesthetically more serious problems like hardware failures.

 

Following are some potential reasons your Hisense television WILL be off and not work at all.

Power Supply Issues

 

There are many factors and reasons why a Hisense TV does not turn on after use such as lack of power.

 

One of the most common would be the power supply problem.

 

This comes due to several issues such as:

 

No Power to Power Outlet:

 

On rare occasions, the outlet may not be putting out power.

 

Power Cord Damage:

 

The cord could simply be loose and some of it not in contact with the plug socket or there could be damage to the cord itself.

 

Failure of the internal power owners:

 

There may be problems with the internal transformer components that convert electrical energy.

 

Remote Control Problems

Something that is more often than not responsible for this issue is the remote control. If the remote is dead or won’t work, you can’t switch on the TV.

Software Glitches

 

Some developers also release patches for smart TV applications. When that happens to your Hisense TV, please understand that it was updating or installing apps.

Hardware Malfunctions

 

There may also be physical issues including a defective screen or motherboard that are more serious. Usually, these issues require qualified help.

Overheating

 

In long-term usage scenarios, the TV may switch off autonomously in an attempt to cleanse itself of excessive heat.

 

After a long period of use, a cool-down TV may be allowed to cool down for a while before power is restarted.

External Devices

Also, other devices like game controllers and personal computers may prevent that television from powering up.

Troubleshooting Steps 

Now that we have identified the potential causes, let’s delve into detailed troubleshooting steps to help you diagnose and fix the issue.

Hisense TV Picture Settings 

Step 1: Check Power Source

To begin with, check if the TV is plugged into the socket and is switched on.

 

Look at the power source:

 

put any other object in the same power source or outlet and see if it works. In case it does, the outlet is okay.

 

Check the power cable:

 

visual inspection for the ripped or torn areas. Also, check the power cord that is firmly fixed in the TV and the wall socket.

 

Change the Power Source Try using another outlet to plug in your TV if you suspect that the present one is not working properly.

 

Step 2: Inspect the Remote Control

 

There are occasions when everything else appears to be working normally on your TV, but it is simply unresponsive to the remote. In this case, it’s time to give the remote a check.

 

Change the Batteries:

 

 If you still have other remote controls in the house, swap the batteries for new ones and see if that solves the problem.

 

Use the Power Button on the TV:

 

Try pressing the power button on the TV itself and see if it comes on.

 

This may assist in ascertaining whether or not the remote control is the cause of the problem and shun the speculations of broken TV sets.

 

Step 3: Perform a Soft Reset

 

In the same vein, a reboot works wonders in solving problems.

 

Unplug the TV:

 

Remove it from the socket or any source of power.

 

Wait: Leave the TV off for around 60 seconds.

 

Plug It Back In:

Try turning on the TV again when it comes back on.

 

Step 4: Check for Overheating

If this is the case, then the TV was probably left on Long enough that switching it back on would require some inches of air first to cool down.

Let It Rest:

Shut the TV and pull the plug if that is what you think is going to overheat it’s in use. Allow at least half an hour for cooling down, then go for it once more.

 

Step 5: Examine External Devices

 

Occasionally, external devices plugged into the TV can cause it not to function properly.

 

Disconnect All External Devices: 

 

Unplug all HDMI cables, gaming devices, or anything else that is attached to the TV set and all sockets.

 

The device you don’t want to be constantly in use for turning the TV on and off is the power cable. In a moment let’s see which devices must be enabled.

Step 6: Update Firmware

A software update may be overdue if the TV is powered on but the device is performing unusual tasks.

 

Access Settings:

If the TV is powered on, then you will have to go to the settings menu.

Select Support: Go to the support section.

 

Check for Updates:

You will be prompted to follow on-screen commands that will initiate the updating of your TV firmware.

 

Step 7: Factory Reset

 

If she still does not respond to these procedures the last resort will probably be the factory settings.

unplug the TV: 

This is the same as the previous step where the TV needs to be unplugged from the wall.

 

Press and Hold the Power Button:

 

Without being plugged in, press the machine’s power button and hold for around 15 seconds.

 

Reconnect and Turn On: 

 

After a few moments, the power cord should be plugged back into the machine’s outlet and the appliance switched on.

 

Step 8: Seek Professional Help

 

At the same time, I have encountered some difficulties while troubleshooting my Hisense TV. It is time to take the TV to a service center.

 

Contact Customer Support:

 

To assist you with this, Hisense also has customer care services.

Visit a Certified Technician: If the television is still under warranty, you should ask if it’s covered by the warranty.

Hisense TV Turns On But No Picture Or Sound   

Personal Anecdote: My Hisense TV Experience

 

There’s this specific event I remember my Hisense TV refusing to turn on.

 

My friends were over for a movie marathon on Friday night, it was the last day of the week.

 

Sitting with my friends after a long week at work was a day I had been waiting for to watch a nice movie.

 

 hit the power button and simply froze as the screen remained black and inactive.

I was so worried that I had even too much.

 

I removed the cord, put it back again, and even checked the remote – there were no changes.

 

That was one more thing that broke right when it was clear I would need it most! A couple of minutes later, I figured out the procedure I have illustrated here.

 

I even cleaned every power outlet I found, changed the batteries for the remote, and performed the soft reset.

 

Fortunately, this too worked with the other devices, and we were able to have our movie night anyway.

 

FAQs

What should I do if my Hisense TV turns on but has no picture?

If injuring another person’s TV on a top level this minor altercation will be injury taking on television, Simply adjusting the brightness and contrast settings could help if that unfortunately is the case with your TV.

How can I tell if my Hisense TV is receiving power?

If ticking sounds are heard it is often the case that the power supply may be malfunctioning.

 

This sometimes requires the intervention of a professional to ascertain and resolve the underlying situation.

 

Can I fix a hardware malfunction myself?

In the case that you are right with electronics you may try to perform little repairs to the device.

 

In case there are serious faults in the hardware, it is better to seek the help of a technician.

Why is my Hisense TV making clicking sounds but won’t turn on?

In most cases, clicking noises relate to a power supply failure.

 

To find the reason and eliminate it, it will be necessary to engage a professional.

What should I do if my TV is under warranty and has a power issue?

If your TV’s warranty is still active, do not hesitate to reach out to the Hisense support department or the shop that sold you this item.

 

They can assist you in guiding you through this process of repair or replacement.

Conclusion

It can be really difficult to deal with problems in the Hisense TV, especially when you are waiting for some peace with your favorite programs.

 

Still, many of the issues are simple enough that you can do a little investigation as to why it has happened, and take some of the regular home repairing actions.

 

Regardless if it is a thing-oriented supply issue or a remote issue, or if it is something worse hardware perspective affairs wise.., this guide is to be able to help you with this situation.

How To Stop Hisense TV From Optimizing