Vizio Smart Tv Won’t Connect To Wifi [Solved]

It’s Friday night, and you’ve been anxiously waiting to catch a few episodes of your favorite television series on your Vizio Smart TV. 

You’ve made sure that your favorite munchies are all in place, gotten comfortable on the couch, and pressed the power button, only to face an annoying “No Internet Connection”. 

You begin to get angry because it dawns on you that the Vizio Smart TV has no WiFi connectivity. 

If you have ever been in this scenario before then rest assured, you are not alone. 

This article will discuss some of the possible reasons for the problem, suggest a remedy, and address miscellaneous FAQs that you the reader are likely to face.

Framing the Issue: 

Reasons for WiFi Connectivity Concern

But as you go through the explanations, the question that still lies at the core of every viewer’s mind is what the actual issue behind the Vizio Smart TV’s connection to Wifi is. 

Many factors can lead to issues in connectivity such as:

Network Configuration Errors

Invalid Email: 

One of the primary factors that led to connectivity issues was the registrar’s email password which was left unchecked. 

Ensure that you have the correct information in order to make sure everything is accurate.

Multimedia Ethernet Source, identifying the PSK: 

Network name identification (SSID) can occasionally exist instead of identification and may result in certain TV features being disabled.

Router Problems

Router overload: 

In the event of connecting too many devices on your WiFi, such issues are likely to occur. 

However, Routers only support a specific amount of simultaneous connections.

Equipment overload: 

Old firmware can make the devices perform poorly and this can be exemplified by trying to connect to the Smart TV.

TV Configuration and Software

Software version: 

There are bugs on some Vizio TVs which have been corrected in a software update that forms part of the television device’s updated version improving connectivity. 

Thus, running a firmware update is vital.

Network configuration problems: 

In some cases, some of the TV network settings might have been erroneously set and these may require either reset or manual configuration to the expected standards.

Physical Influences

Signal obstruction: 

The Wifi signal can be blocked by walls furniture and some other electronic devices causing connection failures.

The range of the Router: 

If the TV is located in an area where it is too far from the router, the signal might be weak leading to difficulties in connection.

Internet Service Provider

Service interruptions: 

In some instances, the problem could be with your ISP instead of devices. 

If there are outages or problems with the service provider the Vizio Smart TV might fail to connect.

Troubleshooting Vizio Smart TV Won’t Connect to WiFi issue

Having discussed the issues that may arise, it’s time to take a further critical review of some troubleshooting measures to solve the problem of being unable to connect Vizio Smart TV to the WiFi network.

Step 1: Check for Network Connection

Understanding that, before we attempt more serious combinations, it is beneficial to verify all of the basic connections once more.

Test Other Devices: 

Use a mobile phone, or a laptop to check the use of WiFi. 

If such devices also have connection issues, it may be a good idea to check the network or router.

Restart Your Router: 

Turn off your router from the electric power socket, wait for around 30 seconds at most, and reconnect it. 

This basic step can help remove temporary glitches and assist in better connections.

Step 2: Inspect the TV’s Network Settings

Come into the Menu: 

Switch on the Vizio Smart TV, try to locate the Menu button on your remote control, and press it.

Proceed to Local Area Network Configuration:

Click on Network.

Click on Network Settings.

Select Your Network: 

Ensure that your home WiFi network is selected. If this is not the case, touch it and enter the password in the appropriate prompt.

Step 3: Disconnect and Reconnect the Network

Disregard the Network:

In the Network Settings, touch the particular network, and set settings to Forget network.

Once forgotten, reconnecting can be done by clicking on your desired network and entering the password.

Vizio TV Power Light Flashes 15 Times [Fixed]

Step 4: Updating the Software of your TV

Resolving compatibility issues may effectively be achieved by making sure that the software is kept updated.

How to go to Settings: 

Press on Menu and select Settings.

Choose System:

Once you have done this, select Check for Updates under the option System.

If an update is ready, prompt it to download and install to complete the process.

Step 5: Reset Network Settings on the TV

In case the above fails in doing the task, the last step is annoying but has the best results, resetting the network settings has been known to do the trick.

Go To Settings: 

Return to the Menu and press on Settings.

Reset Factory settings

Search for the Reset & Admin function and select Network Reset.

Answer the prompt that asks if you are certain to reset the fuse when prompted with this question. 

However, you should expect that such a procedure will erase all network configurations and therefore one will have to reconfigure them.

Step 6: Change Router Settings

If all does not work, after unplugging, your Vizio Smart TV will relay a need to check for its last wireless connection battle and check Router settings.

Access Router Settings:  

Open the Browser and type the IP address of your router, usually located at the back or manual of the router.

Login: 

Enter your login credentials. If you have never changed them, the username defaults to ‘admin’ and the password is ‘password’.

Check Security Settings:

Always set the security type to WPA2 or WPA3 since older protocols have limitations when used with new devices.

Change WiFi Channel: 

While changing the WiFi network may be an option for close interference, consider changing the channel on which your WiFi operates as a good option. 

For the 2.4GHz networks, channels 1, 6, and 11 are most frequently suggested.

Step 7: Connect Using Ethernet Cable

When all is said and done, if your TV are Therma equipment does still connect with any wifi then try connecting the equipment directly to the router through the Ethernet cable. 

This may be useful to tell if the WiFi network is the cause of the trouble or if the TV unit is defective.

Step 8: Contact Vizio Support

In the event everything else has failed, this may be an opportune moment to make contact with Vizio, who is the customer support. 

They are very likely to provide support based on the particular model and situation you may be in.

Personal Anecdote: 

A Night of Frustration Turned into a Learning Experience

There was a day that I remember when it finally seemed suitable to hold a movie marathon with my Vizio Smart Television. 

After configuring all devices, I encountered the most dreaded issue, which is WifI, I was cool at first. I had a movie to watch, snacks to eat, and a comfortable couch to sit on. 

Instead of getting up and panicking, I thought it best to try and resolve the issues myself first.

I set about performing all the activities suggested above, beginning with a rudimentary act of switching the router off and on. 

Amazingly, that alone did not solve the problem. I remembered that having gone through my TV’s network settings, I had entered the wrong WiFi password. 

Correcting it allowed me to successfully reconnect to the network. That night not only educated me in technical know-how but also patience as well. 

From now on, my confidence in troubleshooting any WiFi issues with my Smart TV is very high.

FAQs About Vizio Smart TV WiFi Connectivity

 Why won’t my Vizio Smart TV connect to WiFi?

There can be several justifications: 

the password might be entered incorrectly, there might be an issue with the router, or the TV may need to be updated.

How can I exercise a network reset on my Vizio Smart TV?

Menu> Settings> Reset & Admin> Select Network Reset.

What if my other devices are on the WiFi but the Vizio TV is not?

This could mean that the particular setting on the TV is the problem. So, follow the steps for troubleshooting explained above.

What can I do to increase my WiFi signal for the Vizio TV?

Check that the router is at a central point and not shielded by walls or electrical items that could block the signal.

What if my ISP is down, can I still use my Smart TV like any other TV despite the absence of an internet connection?

If your internet service is down, then most of the Smart TV features cannot be employed. But Spy also is capable of viewing any offline available content.

Conclusion

When a Vizio Smart TV refuses to connect with WiFi, it can easily be a most annoying experience as all you desire is to relax and watch your favorite show. 

Once you are familiar with the possibilities of the connectivity issues and have followed the comprehensive instructions provided addressing the problem. 

You are in a good position to tackle this particular problem. 

Don’t forget that technology is no magic wand as there are ups and downs; however, solutions are always available for such challenges. 

In case you find yourself within such a context, utilize this guide as your map to restore the situation to normal for easier streaming once again.