Hisense TV red light blinks 2 times no picture (Fixed)

After switching your Hisense TV on, only to see it flashing two red lights over and over again without displaying any image, it is very easy to sigh in despair. 

 

But before you begin to think of the worst outcome, let’s take a look into what could be the reasons for this problem.

 

Power Supply Problems ‘My red light keeps blinking’ is a phrase that can quite simply be blamed on the power supply. 

 

Your Hisense TV will work properly if there is stable voltage and current. For instance, a faulty power supply unit is a common cause which causes inadequate power. 

Hisense TV Turns On But No Picture Or Sound 

Thus the two blinking red lights are the signals.

Firmware Glitches similar to every other gadget in this generation, Hisense TVs have firmware which is the software that regulates activities within the TV.

 

If at all this firmware gets damaged or malfunctions, that is in most of the cases during the update or a surge in energy in the house. 

 

Thus the problem of blinking red lights gets activated.

 

Internal Component Failures The mechanism of the internal aspects of a TV is a bit complex since there are a number of components that collaborate in bringing the display of clear images on the television set.

 

In the case where any such internal accessories that include the brains or the screen of the TV itself go bad, the two red blinks indication of the failures are brought up.

 

Whip up

 

Another possible explanation for this kind of issue could relate to overheating during operation.

 

In case the shelf where your TV is placed is inappropriate in terms of ventilation, the TV will ultimately be going to internal thermal shutdowns and later on, blinking red lights.

 

Personal Anecdote:

Hisense TV is Owned by Me. I still recall the time I committed myself to buy a Hisense TV which turned out to be a 4K model.

 

I removed it from the box and arranged it in the living room with fond hopes of watching my favorite sequence.

 

To my utmost horror and sadness just after some days unlike newer ones, I came across the cursed two red lights blinking back at me.

 

Imagining that I may have to take it back caused my heart to dread.

 

After what seemed like ages of trying different things, and doing some readings online, I finally was able to access the TV, and it was the hard way that I learned how to properly care for and repair electronics.

 

Troubleshooting Steps: Fixing the Two Blinking Red Lights

 

With respect to the probable issues we have expounded on, let us move on to the in-depth procedures that you need to follow in order to put these problems to rest once and for all.

 

All actions are taken in a sequence that is devoid of complexities so that even those who are not particularly tech-savvy may find something that will solve their problem.

My Hisense TV Won’t Turn On Red Light Flashes 

Step 1: Power Cycle Your TV What to Do: Unplug the TV: 

 

Due to potential overheating, begin with removing the Hisense TV from the AC power source. 

 

Wait:

 

Leave it unplugged for about 10-15 minutes.

 

This will cause residual power to discharge and can assist in making reset of the internal systems of the TV.

 

Reconnect:

 

After the wait, plug back in the TV and try to switch it on once more. Why It Works: Power cycling clears up small errors caused by the blinking lights notion. 

 

Step 2: Check the Power Supply What to Do:

 

Inspect the Power Cord:

 

Inspect the power cord of your TV for any fraying or visible damage. If you see split wires or connectors at right angles, the cord should be replaced.

 

Test with a Different Outlet:

 

Plug the TV into another socket to eliminate the possible problems with the socket itself.

 

Why It Works: 

 

This is because insufficient power supply will lead to inappropriate behavior such as blinking lights, which are caused by the power cord or outlet.

Step 3: Reset Will The TV What to Do:

 

Locate the Reset Button:

 

Look for a reset button found on the Hisense TV which some models have located at the power input plug. Otherwise, it has to be reset from the remote if it is in working condition.

 

Press the Reset Button:

 

The 0 button pushes the button switch for a few seconds to switch the TV off and then on again.

 

However, using a remote, go to the menu, then to the settings tab, and search for the option ‘Restore Factory Defaults’.

 

Why It Works:

 

One of the most effective ways to eliminate these issues is by performing a factory reset and thus eliminating any firmware flaws.

 

Step 4: Further Check if the TV is Overheating

 

What to Do: 

 

Check Ventilation: Examine whether there is no excess heat trapped behind the television set. Take away any placement of the unit which may be obstructing vents.

 

Cool Down:

 

When the television is still extremely hot, do not do anything for a moment and allow the set to rest before switching it on again.

 

Why It Works:

 

However overheating can result in further damage to the TV and continued operational failure, this is not an option.

 

Step 5: Firmware Update

 

Connect to the Internet:

 

When the TV goes online, make sure it searches for any available firmware updates.

 

Download Updates:

 

You will be presented with a prompt, follow it to install new firmware.

 

Why It Works:

 

Some bugs known to already exist which makes the TV blinking problem can be resolved with such firmware updates.

Step 6: Seek Professional Help

 

If the problem still exists after performing the above steps, it will be advisable to think about calling a professional technician to help you or contact the Hisense support team.

 

What to Do:

 

Gather Information: Prepare details about your TV model and the symptoms you’ve experienced.

 

Contact Support: Reach out to Hisense customer service or take your TV to an authorized repair center.

 

Why It Works: Professionals have the tools and expertise to diagnose and repair deeper issues that may not be easily identifiable.

 

FAQs: How To Solve Hisense TV Red Light Blinking 2 Times

 

If my Hisense TV blinks red twice, what does it mean?

 

The two blinking red lights are notice indicators of a fault, usually associated with power supply problems, firmware issues, or component faults.

Hisense TV Not Turning On 

What should I do to get rid of the red light that is blinking red?

 

Go through the troubleshooting procedures in this article starting power cycling and checking the power supply.

 

How can this problem be avoided in the future?

 

Maintain appropriate airflow, keep a routine firmware update, and don’t work without a surge when electricity is overloaded.

 

Can I try to repair this myself or should a professional handle it?

 

After performing the basic troubleshooting steps, if there hasn’t been any improvement, I would recommend contacting a technician for assistance.

 

Can I damage the TV permanently because of overheating?

 

Yes, repeated overheating will make internal components incur excessive wear and tear beyond the point of no return.

 

Conclusion: 

 

It’s normal to grow frustrated when faced with the shimmering red light on your Hisense TV. 

 

One can however be patient and at the same time careful as the problem is most of the time, fixable.

 

As you must have already identified the problems and browsed through the solutions, here are the things you can do to put your TV back in the “working” status. 

 

Don’t forget that even the most obvious actions like simply unplugging the TV or checking for the ventilation may resolve the problem faster than expected.

 

Another good thing about the Hisense TV is that it does not detract from the entertaining atmosphere.

 

If anything, it enhances it as you are able to watch movies and TV series for hours without any interruptions.

Hisense TV Settings